Intel Core 2 Duo and Extreme Processors

For a company like Intel to stumble and that too, badly, for the two years prior to the launch of the now runaway hit, the Core 2 Duo has been quite an experience (not to be confused with the P4, Core Duo - whereas the P4 Core Duo could complete three instructions per cycle, the Core 2 Duo can complete 4 – and that is without talking about processing power and efficiency). Especially when the underdogs, AMD had almost overtaken it.

But then, all that has changed with the introduction of the Core 2 Duo and the rest. It was when Intel decided to scrap the Netburst micro-architecture that never reached the potential that Intel believed was possible, and focused on the Pentium M architecture designed by their Israeli team that things started brightening up.





The architecture of the chip is simply known as Core, of which the products include Core 2 Duo and Core 2 Extreme. Both run on an 1066 MHz FSB bus and are built using 65nm transistors. Again, both are dual core chips, with the Core 2 Extreme coming with a higher cache and a higher clock speed. (There is also a workstation version of the Core architecture – Woodcrest Xeon.)

These processors are built on a 143 sq mm die and are made up of 291 million transistors, regardless of their L2 cache size. While rivals AMD use 90nm tranistors on their chips, Intel uses the 65nm ones.

Code named ‘Conroe’, Intel’s Core 2 Duo will have a mobile counterpart, named ‘Merom’.
Following are the various versions of the Core 2 Duo that are available.




Testing by PC World and others show that the Core 2 Duo processors are the fastest amongst the range considered for the desktop PCs. (Of course, we haven’t talked about the Quad Core ‘Kentsfield’ series from Intel – consisting of two Conroe chips.)

Apart from that, the Core 2 Duo series boasts of lower power consumption, resulting in lesser heat and higher performance.

Of course, the disadvantage is that you cannot use the processors on your existing motherboards as these processors - though they sit on the same Socket 775 interface as with the earlier Pentium 4 sockets – require different chipsets. Major manufacturers are ready with their motherboards which can use these Intel powerhouses, e.g. Gigabyte, ATI, nVIdia.

While it is difficult to say that whether investing in a Core 2 Duo motherboard makes sense in terms of longevity and it is known that the processor is incompatible with a lot of Pentium-compatible chipsets, it depends on the customer to make the call.

Your USP Battery Caring

The battery is integral to your UPS system and has a huge effect on its reliability and ability to provide power protection. It is highly important to care for your battery, especially as this is what will protect the critical load in a situation such as a power cut or failure. A battery has a limited life span and the care of your UPS battery is highly important when it comes to ensuring that everything is in working order and that your UPS system will work correctly if a power failure occurs.

UPS systems act as a backup in the event of a power cut or failure. Many businesses’s now use these systems as they provide a secure power supply which can be relied upon in the event of an emergency. This additional security is integral to business’s who rely heavily on electrical machinery such as hospitals or multinational companies, for whom even a short power shortage could have a huge effect on day to day business.
The UPS battery plays a large role within the systems, making it vital that it is well cared for. This is the component that provides the energy in the event of a power failure. When it comes to caring for your UPS batteries it is important to follow the guidelines suggested by your supplier. This includes regular maintenance and checks which will ensure that any battery faults and issues are detected quickly and will also help to pro long the life of your battery.
Routine checks will ensure that in the case of a power failure that you are prepared and that the UPS battery backup will provide you with protection during a power cut. If any faults are found at a routine check you can then contact the original supplier to discuss a battery replace or upgrade to ensure that you and your business are continually protected. Once a battery fault has been detected you will then be advised as to the best course of action to take, this could involve a number of things to ensure the future securing of your power supply and leave your UPS system in good working order. So as you can see protecting your battery and ensuring it is healthy will help to ensure the smooth running of your business.
To learn more about uninterruptable power supplies and UPS batteries contact a specialist company who will be able to give you professional advise regarding the most appropriate system for you business needs and also the various different sizes and enclosures available.(Needbattery.com)
So if your interested in UPS batteries or the possibility of installing a UPS battery backup for your business, why not contact a specialist supplier for more information.

How A UPS Works

There are several categories of static UPS systems available. Broadly speaking, UPS Modules fall within one of three operational design architectures, namely off-line, line interactive and on-line. However, irrespective of their individual design criteria certain features are common to all forms of static UPS systems - i.e., they all contain batteries which store energy when the mains supply is available and a means of converting the battery charge into an alternating current (ac) supply in times of mains failure. All systems must therefore include a battery charger and a power inverter circuit. As described above, the battery provides a power source for the inverter when the mains supply fails, whereupon it discharges at a rate determined by the critical load connected to the UPS output. The inverter automatically shuts down when its dc supply falls below a certain voltage, therefore the duration for which the critical load can be supported in times of mains failure depends upon the battery capacity and the percentage applied load. A typical UPS system, which may be referred to as, Uninteruptible power supplies, Uninteruptable power supplies, Uninterruptable power supplies, Uninterruptible power supplies, Energy Systems, or simply UPS, will contain sufficient battery capacity to support its fully rated output load for 5 to 15 minutes. However, in most cases this can be extended by adding further battery cabinets or selecting batteries of a higher capacity. The battery backup time is often referred to as the autonomy time. Virtually all systems contain a `bypass` system which, in conjunction with some form of output switching circuit, provides a means of connection the critical load directly to the mains supply. In most cases the output switching circuit is implemented using solid-state switching devices. The rules governing the static switch control depend on the UPS operating mode. Line-Interactive System This type of UPS covers a range of hybrid devices that attempt to offer a higher level of performance than conventional off-line designs by adding voltage regulation features in the bypass line. The two most popular types of system in this category employ either a buck/boot transformer or a ferroresonant transformer. Like off-line models, line-interactive UPS normally supply the critical load through the bypass line and transfer it to the inverter in the event of a bypass supply failure. The battery, charger and inverter power blocks are utilised in the same manner as in an off-line system but due to the added `regulation` circuits in the bypass line the load is transferred to the battery-fed inverter supply less often, making this type of system slightly more efficient in terms of running cots and batter `wear` compared with an off-line system. Buck/Boost Transformer Design One of the drawbacks of the straightforward off-line design is that the load must be transferred to the inverter immediately the bypass supply voltage reaches voltage limits acceptable to the load. This means that the UPS might transfer between bypass and inverter quite frequently if it is set up to operate with a critical load having a tight voltage tolerance. Apart from the power break each time this occurs, this method of operation incurs frequent battery usage which reduces battery life and might perhaps result in a battery that is inadequately charged when it is called upon to support a prolonged mains blackout. A buck-boost transformer connected in the bypass line helps overcome this problem. The transformer has tapped secondary windings which are selected by relays to either step-up or step-down the bypass voltage as appropriate to maintain the UPS output voltage within the required output voltage limits. This means of controlling the output voltage permits a wider variation of bypass voltage to exist before the output voltage reaches its limits and initiates a load transfer to inverter. A typical UPS in this category will sustain the load voltage over a bypass voltage range of +20. Note that although the output voltage is maintained within its preferred window using this method, buck/boot switching unavoidably leads to a degree of step voltage changes as tap changes take place. On-Line System An immediate difference between this design and the previously described off-line system is that the battery charger is replaced by a `rectifier/charger` black. The rectifier/charger may be two separate units or a combined power black. When the mains supply is present this black float charges the battery and supplies the inverter with a stable de voltage. In the absence of the mains supply the charger shuts down and the inverter dc supply is provided by the battery, which begins to discharge. The connection between the rectifier/battery and inverter is often known as the dc busbar , or dc bus. As part of its control function the rectifier/charger generally includes an input current limit feature to provide overload protection an a dc overvoltage shutdown mechanism to protect the batter/inverter and dc filter components This UPS design, which is sometimes also referred to as a double conversion UPS, offers the greatest degree of critical supply integrity in that the load is supplied with processed power at all times. That is, when the UPS input mains supply is resent the rectifier, charger and inverter power blocks are all active and the load is connected to the inverter output via the static switch. As the load is powered from the inverter under normal circumstances it is well protected from input supply aberrations because the rectifier and inverter act as a barrier to mains borne noise and transient voltage excursions, in addition to providing a well regulated output voltage. If the input supply goes outside a preset voltage range (typically +10), or suffers a total failure, the inverter continues operating from battery power and the event is totally transparent to the load as there is no transfer operation involved. When operating from battery power the inverter supplies the same degree of supply regulation as when the main is present. If the mains is not restored before the battery reaches its end-of-discharge voltage the inverter shuts down and, in some models, the static switch may attempt to transfer the load to the bypass line. The result of the transfer action depends on whether or not the module`s bypass line is connected to the same mains supply as the modules rectifier, and if the bypass supply is live. (Known as a split bypass system.) What Happens if the UPS Fails? A UPS Fault is generally seen as the inability of the inverter to provide the correct voltage or requency at the UPS output terminals and the resulting actions that take place may vary between models. Usually, the UPS control logic will detect the failing output voltage/frequency as the fault occurs and immediately signal the static switch control system to transfer the load to the bypass line in a make-before-break fashions. However, if the inverter is not synchronised to the bypass supply when the transfer is called fro it will be impossible to perform a break-free transfer operation, consequently there will be a brief supply break while the transfer takes place. These are the only circumstances under which the load is subjected to a (brief) supply break in a true on-line ups system. Note that although the break-free transfer to bypass is transparent to the load it is no longer supplied with processed power once it is transferred to the bypass supply; also, if the bypass supply is unavailable when the `fault` transfer is necessary a total loss of power to the critical load is unavoidable. The static switch usually transfers the critical load back to the inverter automatically once the inverter fault clears. This feature is occasionally described as auto-retransfer. The response of an on-line system to an output overload is usually similar to that of the UPS failure described above in that the load is transferred to bypass until the cause of the overload clears whereupon it automatically re-transfers back to the inverter. If the bypass supply is unavailable this will lead to a total loss of load supply, therefore some systems allow an overload condition to continue to be supplied from the inverter for a finite time ? that is the UPS equipment is able to supply enough current to a faulty piece of load equipment to ensure that the load protection fuse or circuit breaker will automatically disconnect if from the UPS. While feeding the overload under these circumstances the inverter operates in a current-limit mode and its output voltage may be reduced deliberately, but in most cases this is preferable to total power loss and of course conditions will return to normal if the overload is cleared during the allotted time. Parallel Systems This type of system comprises two or more UPS modules sometimes referred to operating in parallel to feed a common critical load bus, and is generally applicable to medium/high rated modules of on-line design. Units forming part of such a multi-module system are almost identical in operation to that of their corresponding single module counterparts. In fact, some manufacturers deign their UPS modules such that they can be used in either configuration without the need for complex modification. Each module contains a static switch to provide a means of transferring the load between inverter and bypass. However, a certain amount of inter-module electronic control logic is added to ensure that all the module's static switches operate simultaneously when transferring from one power source to the other. Damage would result if one module attempted to transfer its output to the bypass line which the others remained on inverter. Additional inverter control functionality is also required to facilitate inter-module load sharing and frequency synchronisation. These control signals, and others, are passed between the modules over low voltage control cables which are normally connected in a ring configuration to allow each module to communicate with every other module in the system. One advantage of providing external input and output isolators for each of the modules is that it allows modules to be fully isolated and `hot-swapped` if necessary without disrupting the remainder of the system. There are two major reasons for installing a parallel system. The first is to increase the effective UPS capacity to enable the 'system' to power a larger load that is otherwise possible with single module. The second is to introduce a measure of module redundancy to improve the anticipated system reliability. Parallel UPS systems are therefore commonly categorised as either `capacity` or `redundancy` systems, although some are intelligent enough to operate as either, depending on the prevailing circumstances. Irrespective of the intended mode, all the modules forming part of a parallel system must be of the same type and rating - i.e. it is not possible to parallel a 30kVA unit with one of 120kVA. Installing the UPS Delivery and Positioning The importance of planning the installation and delivery of the UPS system cannot be overstated. Having chosen a particular system and topology it is important to decide:1. Will the system fit into the space reserved for it? 2. Is the proposed location suitable? 3. Can and how will the system be transported to the location Size & Weight Improvements in UPS technology and design have provided much higher power densities which when combined with the flexible installation options for modern parallel systems make it much easier to find space for UPS systems. Also, because the most modern designs no longer need bulky and heavy input transformers, installation of very powerful UPS systems is no longer limited to the ground floor or basement plant room. The manufacturer or supplier will provide details of space requirements and details of module weights in the UPS system specification. Be sure to consider possible future expansion when choosing a UPS location and if you can allow extra space over and above the manufacturers recommended minimum, maintenance and service will be easier. A UPS system is not just a big battery box. It contains electronic components similar to those found in computers and therefore requires careful handling when being transported. Additionally, large UPS equipment will be heavy and unwieldy and will require specialist contractors using `air-ride` suspension vehicles and specialised lifting equipment to unload and position it. The UPS supplier should be able to recommend handling procedures and suitable contractors with experience in this field. Choosing a Suitable Location The choice of a particular installation location for the UPS depends on many things: 1. How much space is available? 2. Can the floor safely support the weight of the equipment? 3. Will the installation cause continued inconvenience to the existing personnel and business? 4. Are the environmental conditions at the chosen location suitable? 5. Can access to the UPS equipment be made secure yet convenient? 6. Does the UPS comprise one module or several in parallel? 7. What is the effect of the installation on existing air flow and air conditioning equipment? 8. Will the switchgear controlling the UPS be in the same area? 9. Can the chose area safely accommodate the battery installation? In general the location chosen for modern UPS can be summarised as follows: Small UPS - less that about 20kVA, can be installed in a normal office environment although care should be taken to ensure that the additional noise and heat does not adversely effect the office environment. Medium UPS - between 20 and 100kVA are designed to be installed in computer rooms.Large UPS - greater that 100kVA, will usually be located either in a separate UPS room or in an existing plant room Transporting the System Having chosen a suitable location to suit the UPS system it is vital to survey the proposed transportation route. If a specialist delivery contractor has been employed for the task they will usually undertake a site access survey before attempting to deliver any equipment. Even if the location chosen for the installation could in fact accommodate an addional three or four UPS, access to the area may prove problematic. Check the access route: 1. Is the site easily accessible by road? Bear in mind the size of the delivery vehicle and the equipment required to off-load the UPS. 1. Are all doorways large enough for the UPS equipment and any transportation equipment to pass through? 2. Ensure the equipment can be moved along the entire route especially around corners. 3. Will the UPS need to be carried across soft or uneven surfaces? 4. Are there any stairs between the off-loading point and the final location? 5. If the equipment must be transported using a goods lift, chick that the lift has the required capacity. 6. Ensure that site staff are aware the equipment is being delivered and have made every effort to ensure that access along the route is unhindered on the day of delivery Environmental Considerations Heat All UPS manufacturers will quote a maximum operating temperature for their equipment (typically +40C). The air conditioning plant must have sufficient capacity to maintain the conditions stated. Obviously the overall efficiency of the UPS will have a significant effect on both the size and the operating cost of the air conditioning plant. The high efficiency figures (up to 97). Whilst most UPS equipment is well designed, high relative humidity levels may promote corrosion of cabinets and internal parts. Simple dehumidification equipment is available for sites where this may be a problem. Audible Noise The unit of sound intensity is the decibel (dB) and it represents the ratio between the sound level measured with a microphone and a reference sound level, Odb, which is defined to be approximately equal to the threshold of human hearing. However as the human ear is less sensitive to very low and very high frequencies, an additional `A` Filter is applied when measuring background or other intrusive noises, hence the dBA unit used by all UPS manufacturers. Typical audible noise figures for fully loaded UPS equipment range from 50dBA for 5dVA to 60dBA at 60kVA. Electrical Installation Installation Contractors Electrically installing a UPS, sometimes refer to as or protected power system is a specialised task and should only be performed by a qualified and experienced electrical contractor. The supplier of the UPS equipment should be able to undertake the installation work or supply a list of suitable contractors who can provide references of previous installations. Take the time to: 1. Check the credentials of the staff who will be installing the equipment 2. Contact and investigate previous installations and discuss their work with the staff on the other sites. It is important to ensure that the installation is carried out in strict accordance with the supplier's instructions and it complies with local and national electrical installation regulations. Installation Design Small and medium sized UPS equipment will probable require very little installation work and minimal changes to the existing electrical wiring. However, if larger, high-power UPS equipment is being installed then careful consideration of the switchgear and cabling arrangements must be made. Considerable time and therefore cost savings can be made by carefully planning the electrical installation to allow for possible business growth and the addition of extra UPS Modules. Using an integrated switchgear and bushbar solution, makes the installation process for a modern parallel system much simpler by: 1. Providing a single point of entry for the incoming mains supply 2. a single point of entry for the bypass mains supply 3. a fully interlocked maintenance (or wrap-around) bypass circuit 4. correctly sized bushbars and circuit breakers 5. co-ordinated protection for the load and UPS equipment 6. straightforward connection of load distribution panels Connecting the Critical Loads In order to make best use of the UPS equipment and to ensue maximum protection of the critical load it is important to consider carefully how best to connect the load components. Large ring circuits feeding many critical load devices and unsuitable as a fault on one device may cause the circuit feeding it to trip or fuse and consequently disconnect power to other pieces of important equipment. Radial wiring with individual devices protected by their own circuit breakers is a far better approach? In this way a fault in one device will cause that device only to be disconnected and remaining critical load elements will remain undisturbed. To avoid confusion, particular attention must be paid to the labelling of circuit breakers and fuses in the load distribution panels. Earthing In any electrical installation correct earthing is essential for personnel safety and equipment protection. A protected power installation in no exception, it is a essential to ensure that all earthing points within the system are connected to a properly planned and secure earthing system. As a minimum a properly planned and secure earthing system for a computer and UPS installation must provide: 1. Protection against electrical shock 2. A short, low impedance return path for fault currents 3. A path for induced currents caused by high voltages such as lightning 4. Straightforward connection facilities for future expansion. Most earthing installations are based on star or grid configurations. Generator Maintenance and Testing A regular generator service program should include tests and checks of the following: 1. Cooling system Radiator/heat exchanger, coolant, hoses and connections, fan drive pulley and fan, fan belts, jacket water heater, water pump, thermostats. 1. Fuel systemFuel tank, water trap/separator, fuel lines and connections, governor and controls, fuel filters ? primary/secondary, fuel pressure, air induction and exhaust system, air filter, air filter service indicator, air inlet system, turbocharger, exhaust manifold, valves and valve rotators. 1. Lubrication oil system Oil, oil filters, oil pressure, crankcase breather 1. Starting system Batteries, battery specific gravity, battery charger, starting motor, alternator, engine monitor and safety controls, gauges, remote annunciators/alarms 1. Generator Bearings, slip rings and brushes, space heaters, vibration isolators 1. Control panel Start controls - manual/auto, voltmeter, ammeter, frequency meter, circuit breaker, auto transfer switch 1. Gas engine Gas lines and connections, carburettor and linkage, magneto/distributor, ignition system, spark plugs 1. Insulation test Main stator, main rotor, exciter stator, exciter rotor 1. Load testing With full load, perform a two to four hour load test Overall Energy Systems Testing As well as performing the periodic Planned Maintenance of each part of the system, consideration should be given to testing the entire system on a regular basis. An overall system test will involve putting the critical load at risk so careful arrangements and agreements must be made. Mains Failure Test Disconnect the mains supply to the protected power equipment for an extended period and check: " With no generator : " the UPS battery supports the critical load for the expected autonomy time " all alarms and control signals are correct? " the critical load responds correctly to any signals received from the UPS equipment e.g. system alarms, orderly shutdown sequence etc. If a generator is installed: 1. the Automatic Mains Fail (AMF) equipment operates correctly 2. the generator auto-starts after the expected time 3. the generator output supply is correct and within acceptable UPS input limits. 4. the UPS accepts the generator supply 5. battery recharging takes place while the UPS is being supplied by the generator. Mains Restoration TestFollowing the Mains Failure Test, re-connect the mains supply to the protected power equipment and check: With no generator: If the UPS is fitted with auto-restart facilities, 1. The system returns to normal operation automatically, otherwise all UPS modules can be re-started manually and the system restored to normal operation 2. All alarms can be reset. If a generator is installed: " the Automatic Mains Fail (AMF equipment operates correctly " the UPS signals a mains failure during the changeover " the generator shuts down after the expected time " the UPS accepts the restored mains power supply and recharges the batteries " all alarms can be reset. PowerContinuity Means Business ContinuityPlease visit our website at or call us on 0845 055 8455 for further details.

Arranged Vs Love Marriage

Marriage is perhaps the most celebrated social institution. Every girl grows up with a dream of getting the best partner in life and living happily ever after. But the million dollar question is – Who will decide who your Mr. Right will be? Is it the individual herself or is it the family that collectively has to take a decision?

There has been an old debate that continues unending that what lasts longer – Arranged Marriage or Love Marriage? Supporters of both the views have forwarded their points but the battle continues each claiming their own view on the mantra of successful marriage.

Arranged Marriage

Arranged marriages happen all over the world and more so in the conservative societies which emphatically include Asian societies. The parents of the boy or the girl search for a suitable match for their progeny based on several criteria such as caste, religion, family background, education, financial stability, tradition, etc.

In an arranged marriage, the responsibility of a successful or unsuccessful marriage lies with three units – the couple, the girl’s parents and the boy’s parents.

PROS

More chances of harmony – there are more chances of harmony between the bride and the bridegroom since they are perfectly matched in terms of most of the important things of life and therefore they understand each other well. There are no surprises and shocks since they have a fair idea of each other’s family background and upbringing.

Parental support – When parent’s consent is also involved, parents offer unconditional support to the newly weds in times of trouble. They take the full responsibility of any differences whatsoever happening between the two and take a personal interest in their harmony.

Social Acceptance – Though the times have significantly changed, there is still more social acceptance for couples going in for arranged marriage in some societies.

Love Marriage

Marital bliss that is formed on the basis of love alone is the concept of love marriage. Love is blind and the marriage more so happens without considering any other thing like culture, education, age, financial and social compatibility etc. the couple see each other, spend time together and understand each other and finally when they think that the right person is here, they marry. The consent of the parents takes a backseat here.

If you find yourself comfortable in this category, you will probably want to choose the best suitable partner for you in order to avoid regressions later. But let us equally respect the fact that getting what you want is not always easy but nonetheless can be achieved with some worthy efforts to attract your ideal man and keep him craving for more.

However, in a love marriage the responsibility of the success or failure of the marriage lies solely on the couple.

PROS

Love is The Foundation - Unlike arranged marriages that start to thrive on common platforms, a love marriage is founded on love for each other. Whatever are the differences in terms of religion, education, culture, family background, caste etc., the couple takes it in their stride and the love helps them take the normal course of life. There is no external pressure to keep the marriage going except the willingness from the couple.

No Interference – In love marriage, there is complete freedom as the couple enjoys their privacy and freedom to resolve their internal differences. There is no poking of noses in the matters that relate to husband and wife only.

The best part of this debate is that there have been innumerous living examples that support the view of both the sides. Though some people think understanding is the key in a successful marriage, others leave it on destiny.

The Advantages Of Giving Promotional Products To Company Customers And Employees

Many of us might have been wondering why there are companies giving freebies. These freebies are also called promotional products because it advertises companies, organizations and brands. The promotional items are made useful and handy so consumers can bring it anywhere. It will serve as reminders to consumers on the company's brand name. Wherever consumers go, they will remember the brand because they are probably bringing the giveaways.

Are you still confused what promotional items are? They are simply items that are printed with names or logos of companies and organizations. Most of the items given are key chains, pens, pillows, mugs, t-shirts, bags, caps, Etc. It's available in many sizes, shape and colors that often represent the company it advertises. These items are often given as gifts during product launch, seminars, meetings or brand's freebie.

When we buy items from brands giving freebies, we get more value of our money. It's because promotional items are always useful to consumers. We do not only use the products we bought but we also use the giveaways. In short, we get double value of our money.

In order to always get promotional items, we need to choose particular brands. We should always buy from brands that gives freebies so we get our money's worth. But, we should carefully select the company because some manufacture goods with poor quality. That's why they always give promotional items in order to compensate for low quality goods. If we get the wrong brand, we have to switch to others producing high-quality goods.

To know where to get promotional goods, check the stores where different brands are sold. There is always a chance that we'll find brands that gives promotional goods. We can also check online distributor websites in the internet because they usually have giveaways. Many online buyers take advantage of the benefits that distributors often give.

Companies use the idea of giving promotional product because it is one solid marketing strategy. The idea of giving away freebies to consumer has existed since the 1950's. Aside from marketing a specific brand, companies give promotional items as token to loyal customers.

To measure effectiveness of this marketing strategy, various studies were done. It was discovered that product buyers given freebies often return to buy products again. Customer loyalty is often attained by companies with their efforts in giving promotional items. This is because customer loves to receive rewards and gifts.

The studies also found out that a consumer given promotional items recall the brand easily. The secret of companies is to ensure that their logo/brand is visible on giveaways. Consumers that recalls a product name is presumed to always buy from that brand. This will contribute highly to increasing company sales and profit.

Despite the simplicity of other promotional items, it is still effective in advertising brands. Promotional products are not only given to consumers but also to company employees. This encourages employees to work well in the company and help it become successful. People value the gifts they receive and they can do anything to show their gratitude.

About the Author

Prior to making a decision about buying promotional products why not check out the Hot Tips that Be Promoted offer. The experience that Be Promoted have in the promotional industry has enabled them to make a list of hot tips from the many questions asked by their clientel over the years. The Hot Tips are available to anybody that goes to the Be Promoted website.

Processor Slots

These are used to attach the Microprocessor or Main Processor to the Motherboard. Mainly, there are three types of slots are available. (a) Pin Type Slot (b) Slot One (c) Socket Type.


(a) Pin Type Slot : This slot is used from the 80286 Stage to Pentium 4 Stage. This slot is in White Color with Holes for Processor. The holes of the slot are according to the processor type. In this slot we can attach Microprocessor and Heatsink with Fan.


(b) Slot One : This Slot is introduced in Pentium II Stage, and used till Pentium III 600 Mhz., Stage. The Slot is in Brown Color, looks like a Big PCI Slot. In this slot, we can attach Processor along with the Heat Sink and Fan.

(c) Socket Type : This is the Latest Slot which are used to attach Pentium D, Dual Core, Core 2 Duo and Quad Core Processors. It is introduced from Intel 915 Chipset Motherboards and still is in use with Intel 945, Intel 965 and later Motherboards. Oppositely to the Pin Type Slot, this slot is having Pins to attach the Processor.

Find a Tradesman - Suggestions and Preparation

It can typically prove a difficult process to find a tradesman or service supplier, notably in your native space as there's such an unlimited range to go looking through. Native tradesmen comprise of a giant group of people that have acquired particular information, coaching and expertise particularly areas. Plumbers, Electricians, Locksmiths, Builders, Carpenters and Painters are a few of the most sought after tradesmen in your native region. Their services might be required by anyone at any time when the necessity arises, both frequently or at emergencies too. However in as we speak's modern world there are various strategies obtainable to go looking via for these native businesses, making discovering the m outcomes a lot easier. For many individuals, the first port of call after they Find a tradesman for recommendations on dependable native tradesmen has historically been subsequent door neighbors, associates and family.

It may even be doubtless that over the course of time you might need recorded the contact details of reliable tradesmen and service suppliers in your personal private telephone book, so you'd know who to name for emergency water leaks or who could fix a washing machine that has stopped working. Nonetheless, simply as usually, that information becomes dated as tradesmen retire, promote their business, transfer away from the native space or just stop trading, that means that after-stalwart handyman may no longer accessible when the time involves call on his companies and so the process of Find a tradesman begins again.

Before the arrival of the Internet Find a tradesman was a bit bit difficult. Largely word of mouth and handing out enterprise playing cards have been crucial for a enterprise to turn into noticed. In fact, businesses were led to believe there was no different method to go about advertising. As competitors for business has increased, because of a higher amount of tradesmen and a growing inhabitants, so has the necessity for your small business to raise its public profile. Though many local tradesmen and service suppliers proceed to use tried and trusted methods, resembling advertising in native newspapers, distributing flyers and even placing a postcard advert in a newsagent's window, conventional methods to Find a tradesman and repair suppliers are now being given a serving to hand from the Internet.

Many on-line suppliers and native listing websites supply score techniques that enable a person to view the rankings given by previous customers of local tradesmen and service suppliers. This feature provides a possible customer the power to contemplate the most effective particular person or service for the job in thoughts by analysing these scores, which may additionally assist reduce the prospect of dealing with a rogue tradesman or service supplier in Find a tradesman process. Fast and straightforward-to-use online search systems are also now out there to assist in Find a tradesman and that show outcomes match the searchers requirements. A cellphone quantity search utilizing such systems can typically present extra details about Find a tradesman than typical paper-based mostly methods, comparable to a enterprise deal with or trading hours.

What's extra, many businesses can even be instantly contactable by these programs, by means of direct calling, e-mail and even SMS messages, which might all help to boost business. Consequently, these listings can offer speed and convenience in their service, both to the searcher and the enterprise - an usually sought-after requirement for these unexpected circumstances when you might want to Find a tradesman or native supplier urgently, whereas making the business themselves extra contactable.

Article Source : http://www.articlesbase.com/home-security-articles/find-a-tradesman-suggestions-and-preparation-3653245.html